Home > Solar PV Products > Solar Charge Controllers > MPPT Solar Charge Controllers
Delivery: No charge
Availability:
In stock, immediate despatch
SRNE 10 Amp MPPT Solar Charge Control MT-2410 & SR-MT-3 Remote Monitor.
3 Year Manufacturer Warranty.
Adopting double crest or multi crest tracing technique, used for conditions when part of solar panel is under shadow or parts of the solar panel may be damaged.
Built-in maximum power point tracking algorithm which could promote the energy utilization efficiency of PV system. The charging efficiency is 15%~20% higher than that of a PWM control.
It can find the best working point of I-V curve within 1 minute and the MPPT efficiency can reach to 99.9%.
Adopting advanced digital power supply techniques which makes the energy conversion efficiency reach up to 97%.
Four charging stages: MPPT - equalizing charge- boosting charge- floating charge.
With current-limiting charging mode. When the power of solar panel is oversized, the controller will lower charging power automatically, which enable the system to work under the rated charging current.
With fault code indication, helping the user identify the system fault.
Various load control methods that can recognize day and night automatically.
Various system protection functions. Including over-charge, over-discharge, over-load, over-heat, battery-reverse connection and short-circuit protection etc.
Parameters
Value
Model
SR-MT2410
System voltage
12V
Max. input power of solar panel
130W
Transfer efficiency
≤96%
Rated charge/ discharge current
10A
No load loss
<15mA
Max. input voltage of solar panel
<150V
MPPT tracing efficiency
>99%
Over voltage protection
16.5V
Limited charge voltage
15.5V
Equalizing charge voltage
15.2V
Equalizing charge interval
30 days
Boosting charge voltage
14.4V
Floating charge voltage
13.8V
Over-discharge recover voltage
12.5V
Over discharge voltage
11.0V
Boosting charge time
2 hours
Equalizing charge time
1 hour
Over temperature protection
Yes
Light-operated voltage (on)
5V
Light-operated voltage (off)
6V
Light-operated delay time
5min
Working temperature
-35℃~+65℃;
Weight
430g
Altitude
≤3000m
Dimension
143*71*37.4 (mm)
Installation dimension
139*48(mm)
Overload protection
Load current≥1.25 times rated current, cut off the load within 10 seconds; Load current≥1.5 times rated current, cut off the load within 5 seconds
Protections
1.Reverse connection. 2.Inner over temperature. 3.The voltage of PV input terminal is over value. 4.Over load 5.Reverse charging protection at night. 6. TVS lightning protection 7. Waterproof: IP 64
SR-MT-3 Remote Monitor :-
Multi-functional LCD, which can display the charging status and system parameters. Touch screen design, the operation is very convenient.
It can browse the parameters automatically; each parameter will be shown on the LCD every five seconds.
Eight status indicators that can display the corresponding items, the parameter check-up is intuitive.
Adopts standard RJ12 communication interface.
Without external power source, the controller can be normally use by link with USB.
Industrial level design, which can be used under all kinds of severe environments.
Be the first to Write a Review for this item!