EPever 10A Duo Racer DR1206N Dual Battery Solar Charge Controller.
Duo Racer MPPT solar charge controller is made for charging two batteries (shown as BATT1 and BATT2) types including sealed, Gel, Flooded, LiFePO4 and LINiCoMn, which is suitable for RV's, Campers, Boats, Caravans and so on. The devise recogonises the start battery (Batt2) system voltage automatically and trickle charges the battery when the condition are satisfied.
The controller adopts advanced MPPT control algorithm, which will minimise the maximum power point loss rate and loss time, also fast track the maximum power point (MPP) of the solar array, and obtain the maximum energy from the solar array under any conditions. The energy utilisation in the MPPT solar system is increased by 20-30% compared with PWM charging methods. When there is no manual operation for a long period of time, and the charging conditions cannot be reached, the controller will turn to low-power mode, which reduces the loss and battery waste to enhance the product life. The system parameter are shown and set by LED/LCD or the option MT11 remote display meter.
The AES control signal of the car refrigerator is built in the controller, which will supply the surplus solar power to the refrigerator to avoid energy waste. The controller comes with IP33 protection level, which is waterproof and dustproof to this level. Multiple protection features, including battery overcharge protection, over-discharge protection and reverse connection protection of the PV and battery, which effectively ensures the solar system safety, stability and product life.
Maximum power point tracking technology with ultra-fast tracking speed and the tracking efficiency is no less 99.5% guaranteed.
Advanced MPPT control algorithm to minimise the MPP lost rate and lost time.
The wider range of the MPP operation voltage to improve the PV module utilisation.
Auto control function of the charging power & charging current limitation (BATT1).
High quality and low failure rate components of ST, TI and infineon to ensure product life.
Digital circuit control of the adaptive three stage charging mode to enhance BATT1 life.
BATT1 type can be set via LED/LCD.
Controller runs into the low power mode when there us no manual operation for a long time, and charging conditions not satisfied (PV<5V).
100% charging and discharging in operation environmental temperature range.
AES control signal for car refrigerator to avoid energy waste.
- Rated charging current: 10 Amps
- Rated Voltage: 12V & 24V
- Maximum solar input: 130W @ 12V (260W @ 24V)
- Maximum voltage input: 60V
- Dimensions: 227 x 143 x 58mm
- Weight: 0.8kg