20Amp - 12V / 24V Auto Solar Charge Controller with LCD and Twin USB Ports
This CMTD charge control manages the solar panels, batteries and loads. It adds a variety of protection functions, allowing you to run a safe and efficient system. The charge controller has been designed to work with systems up to 240W @ 12V and 480W @ 24V, making it ideal for a range of small off grid setups. The extremely low consumption makes the controller suitable for a range of applications.
The CMTD range comes complete with a handy LCD display, allowing you to monitor your systems performance; coupled with two USB ports, providing 5V output. The load output is designed to run low level non dynamic loads including LED lighting with maximum 3A.
Please note that when setting up your system, please read and following the instruction manual provided. The CMTD charge controller powers up from the battery and should be connected to the battery first and then to the solar panel.
The CMTD range of solar charge controllers come complete with a 12 month manufacturer warranty against defect.
|Model ||CMTD20 |
|Rated Charge Current ||20A |
|Rated Discharge Current: ||20A |
|Rated Voltage ||12V/24V auto detect |
|Over-Charge Protection ||13.7/27.4V |
|Low Voltage Reconnection ||12.6/25.2V |
|Low Voltage Protection ||10.5/21V |
|Charging Mode ||PWM mode |
|Temperature Compensation ||Yes |
|Static Current: ||≤45mA |
|Voltage Drop: ||<200mV |
|Working Temperature: ||-20°C ~ +70°C |
|Operating Humidity: ||≤90% N.C. |
|Weight: ||180g |
|Size (L*W*H): ||174*140*55mm |
|Package: ||1 |
|Warranty: ||12 months |
|Function: ||LCD Display & 2 USB Ports |
|Note: ||Protection Voltage Can User-defined |