2 x 200W (400W) PWM Solar Panel Kit - Black Brackets

400W (2 x 200W) Solar Panel Kit

This 12V/24V solar kit is ideal for a wide range of applications including caravans, sheds, motor homes etc.

These 200W solar panels are designed to be left out in all weather conditions. The solar panel frame is made of a strong aluminium, efficient monocrystalline cells, all backed up by an industry leading 10 year product warranty. Every panel comes complete with its own serial number, which can be traced back through the production process, enabling tighter warranty control.

The SRNE 30 amp charge controller supplied with this kit can be used on a range of leisure batteries including sealed lead acid, gel and AGM. The charge controller provides a convenient LCD screen to help monitor your system, as well as a single USB port. This PWM charge controller comes complete with operating manual and a 2 year product warranty.

This kit can be used on both 12V and 24V battery systems. For a 24V battery system, you will need to connect 2 x 12V batteries together in series. 

You will not lose any current via reverse discharge at night due to diodes in both the solar panel and charge controller.

Each of our kits include a standard install guide as well as the charge controller installation and operating manual.

This kit consists of the following main components:-

• 2 x 200W Monocrystalline Solar Panel

• 10 Year Manufacturer warranty, 25 Performance guarantee on all GG4U Solar Panels 

• 1 x 30 Amp PWM Solar Charge Control, with Single USB Port & 2 Year Warranty.

• 10m x 4mm Solar PV Cable (pre-crimped)

• 1 x Pair of Type 4 Plugs (pre-crimped)

• 1 x Type 4 Branch Connector

• 2 x Sets of 4 Black Corner Brackets

• 2 x Sets of 2 Black Side Brackets

• 1 x Black Double Entry Cable Gland

​*Please note that this kit does not include battery cable. You can use any excess solar cable you have to connect the charge controller to the battery (within 2M). The mounting brackets will require fastenings to attach to the solar panel; we would recommend a minimum M6 x 30mm stainless bolt & locking nut. An adhesive sealant is also required to attach the brackets to the vehicle roof; we would recommend a Sikaflex 512. This kit has been designed so that both solar panels will be installed next to each other in portrait; further solar PV cable may be required if the panels are fitted in another layout.